Limewash Technical Data Sheets
| DESCRIPTION | A limewash made from pure filtered slaked lime, modified with tallow to the Suffolk Preservation Society recipe. |
| USE | Exterior application to lime render, wattle and daub surfaces also on lime/cement surfaces to give a breathable and decrotive finish with good water shedding properties. |
| COLOUR RANGE | White & selected Colours |
| FINISH | Matt |
| SPECIFIC GRAVITY | 1.2 |
| STORAGE | 12 Months in unopened containers |
| DRYING TIME | 4 Hours @ 20 C |
| OVERCOATING TIME | 24 Hours |
| AVERAGE SPREADING RATE | 3-4 m² per litre |
| PACK SIZE | 10 Litres |
| THINNER / CLEANER | Water |
| RECOMMENDED APPLICATION | 3 Coates |
| APPLICATION METHOD | Brush (2 Knot brush or good quality masonry brush) |
| PREPARATION | Remove all loose or flaky material, taking care not to damage existing lime substrate (where applicable). On dry surfaces wet substrate with water prior to application. Dilute the first coat by 50% with water (i.e. 1 litre water to 1 litre Limewash) to ensure good penetration. Subsequent coats by 20%. |
Before starting always read the application guidelines.